Velocity Turbo Systems

All of our Intercoolers are Hand Crafted right here in the good old USA. They are all build to exceed ISO9001 Manufacturing standards and will outlast and out perform any stock unit when combined with the correct supporting components! When combined with the recommended components you can expect Much lower IAT's meaning less fuel and MORE POWER! The Biggest Problem that faces every Modified Cobra is Heat Soaking. The average IAT's that we have seen even with an upgraded H/E, while still using the Stock Gaskets and a Stock Intercooler was around 90-100deg (F). The reason that you can’t get you IAT's down is...

These Adjustable Heat Exchanger Brackets will allow you to install your Velocity Heat Exchanger right up on your Cobra without having to modify any brackets or spend time doing any custom fabrication.  These brackets will also allow you to adjust the position and height of your Heat Exchanger.  This is perfect for those with custom setups, fans or looking to get the most possible airflow onto the heat exchanger.

3-6" Fan's with 4130 Aluminum Shroud Features 3-6" fans that we have made privately to our specs in Italy to ensure the highest performance The Aluminum shroud features yet another Velocity innovation. The shrouds feature 6 rubber Ambient Air Flow Flaps. These flaps allow Maximum Performance from the fans when they are on and also allow ambient air to flow freely through the Heat Exchanger when they are off.Made to fit Velocity's Aluminum Heat Exchangers, can be made to fit other H/E's with some modification. Designed to fit 27"x7" Head Exchangers

This is a 2 core Aluminum 2" thick Heat Exchanger Made 100% in the USA This Heat Exchanger is a Stage-1 Upgrade for lightly Modified Cobras (Example: Pulley, Stage 1 Port, Headers & CAI) Some of the Features that our Heat Exchangers have that others don't: -They are available in 3 different thicknesses -They are standard height and width for easy installation (approx 27"x7") -They are all designed to accept our Exclusive High Performance 3-6" Fan Aluminum Shroud -They all come standard with threaded bosses to give you the option of using our Exclusive Adjustable 4130 Aluminum Mounting...

Includes: -(1) Aluminum 2" core, 1.250" Rows 3.00" O/A Velocity Heat Exchanger Recommended for over 500hp If you Plan on Exceeding 650hp you may want to consider our Stage-2 Heat Exchanger Package, our Stage-2 "Super Cool" Package or our Progressive Alcohol Injection Systems that is build Just for 96-04 V8 Mustangs and SVT Cobras Note- Stock mounting brackets must be modified or for easy direct install please use Velocity Bracket Kit #KDA-25654-01AB.  This part is made to order, please allow 2-3 weeks for delivery.

All of our Intercoolers are Hand Crafted right here in the good old USA. They are all build to exceed ISO9001 Manufacturing standards and will outlast and out perform any stock unit when combined with the correct supporting components! When combined with the recommended components you can expect Much lower IAT's meaning less fuel and MORE POWER! The Biggest Problem that faces every Modified Cobra is Heat Soaking. The average IAT's that we have seen even with an upgraded H/E, while still using the Stock Gaskets and a Stock Intercooler was around 90-100deg (F). The reason that you can’t get you IAT's down is...

For those needing the most cooling capacity the Stage 3 Intercooler upgrade is the ticket.  It has 3x larger coolant passages than the Stage 2 unit, and is much taller.  All of our Intercoolers are Hand Crafted right here in the good old USA. They are all build to exceed ISO9001 Manufacturing standards and will outlast and out perform any stock unit when combined with the correct supporting components! When combined with the support components(such as the Stage 3 Heat Exchanger and Heat Shield Gaskets) you can expect much lower IAT's meaning less fuel and MORE POWER! The Biggest Problem that faces every Modified...